The 375+ features a unique design that incorporates a compact control unit that can be mounted out of sight inside the car with a remote display/ input unit close at hand for real-time programming or monitioring. The 375+ Accessory control harness lugs directly into the 300+ box, allowing the custom software and dual RISC microprocessors to fully interface with each other.
Features:
Two stages of sequential rev limiting control from 1,000 to 12,700 RPM, in 100 RPM increments
Window RPM switch from 1,000 to 12,700 RPM, 100 RPM increments
Fixed nitrous oxide or high-speed timing retard from 0.1 to 15.0 degrees in 0.1-degree increments
Start timing retard from 0.1 to 15.0 degrees in 0.1-degree increments, beginning at 100 RPM, dialing out at 500 RPM
Proportional boost timing retard from 0.1 to 4.0 degrees per PSI of boost in 0.1-degree increments (Requires the use of a MAP sensor)
Selectable to read either 2 or 3 BAR MAP Sensor signals
Tachometer display mode with 10 RPM resolutions and moving point-averaging software for clear resolution
Real time manifold pressure display mode displays vacuum in inches of Hg and boost in PSI (Requires the use of a MAP sensor)
VIEW CART
